Oxygen Concentrator Calibration Lab Services | Sigma Test

Oxygen Concentrator Calibration Lab Services


Oxygen Concentrator Calibration Lab Services

What are Oxygen Concentrators? 

Oxygen concentrators (also known as oxygen generators) can be used instead of compressed gas cylinders.  We provide you Oxygen Concentrator Calibration Lab Services By absorbing nitrogen, they derive 90–95 percent oxygen from room air.

Portable units typically produce 4–10 l/min, but larger systems capable of providing multiple anesthetic machines and generating up to 25 l/min may also be obtained.

Since both of these devices are powered by electricity, a power outage would result in a loss of oxygen supply unless a standby generator, battery backup, and power inverter are accessible.

Alternatively, an oxygen tank can be kept on hand in case of an emergency.

Since the flow of gas from a portable machine is relatively poor, the emergency oxygen button on an anesthetic machine will not work properly, but increasing the flow meter will rapidly flush anesthetic vapor from a breathing device.

Because of the low flow and pressure of the gas supplied by these systems, they are not suitable for use with certain ventilators or with larger animals.

The lightweight, compact devices, on the other hand, are well-suited for use in small procedure rooms where transport and storage of oxygen cylinders can be an issue.

What are Calibration Services

Calibration is the means to ensure that a device meets a manufacturer’s specifications for proper operation.

Calibration may include a report or certificate assuring an end-user that a device conforms with specifications, and perhaps also with external guidelines, such as those of the International Organization for Standardization (e.g., ISO 9001 standards).

Customers request calibration services to ensure that their standardized instruments are providing accurate readings and, where appropriate, are still capable of detecting irregularities, flues, heat, deftness, wear patterns, and so on.

Any system that relies on pressure, temperature, or speed in an industrial or laboratory setting should be optimized to ensure performance. Hence,  a company follows these standards to ensure that its products and/or services gain acceptance among suppliers and customers.

A calibration device is a device that uses electrical signals to calibrate instruments or other equipment.

After determining the precise margin of error, a technician may change the calibrator to the manufacturer’s requirements for improved performance.

Calibration services should not be confused with performance assessment calibration, which occurs when supervisors discuss the results of their workers as a group and devise a collection of scores to grade those performances.

Calibration of Oxygen Concentrator Procedure 

Calibration service providers calibrate instruments and tools using metrology’s standardized measurements.

Technicians can use their instruments to measure and calibrate your instruments based on your specifications, such as a unit of measurement form and minimum measurement accuracy per standards and regulations.

The following three-phase explanations summarize the protocol that technicians follow during the calibration process:

1) description of the unit to be measured

2) measurement realization

3) traceability to a quantitative ranking

  1. Measurement Unit Definition

Technicians also describe and calculate units such as distance (ranging from micrometers to light-years), volume, mass, time, strength, flow, longitude, distance, and temperature.

  1. Measurement Execution

After technicians identify the unit of measurement, they convert it to a quantifiable scale and assign ratings to it.

They then assess the tool’s or instrument’s performance or allocation for this unit.

  1. Quantitative Rating Traceability

Following measurement, technicians assign a grade to the performance. They then equate it to a baseline and document their findings.

They establish traceability by documenting their data.

Applied Machinery

Calibration service providers use a broad range of calibration equipment and machines to perform the many different forms of calibration available.

This includes handheld, fixed, and portable devices.

Handheld calibration devices are usually small and require manual operation.

The calibration instruments that are fixed remain stationary. They are used in factories and other workplaces as required during production. 

Portable devices may be wide and wheeled, allowing them to be moved around a facility as required.

Why are Calibration Services Important? 

Today, such services are needed, as accuracy is critical to ensuring that the right decisions are taken and critical tasks are completed on time. Calibration services are needed in any area of work to ensure that the information derived from a system is reliable and can be used for further research and analysis.

Calibration facilities are extremely critical for a variety of purposes.

However, the following are some of the most critical reasons:

  1. Calibration services ensure the safety of processes when measuring any form of parameter, such as electric current, it is necessary to ensure that the quantities being measured are accurate and that the product being used is safe. If product safety is not guaranteed, security issues can arise.
  1. Calibration services are also relevant because they can assist in lowering the costs of manufacturing errors. Defects in the manufacturing process can cost billions of dollars, so calibration services are essential to prevent such losses. If the system is not calibrated, the whole process will have to be restarted, which will not only cost the owners more money but also take a long time.

For more information on calibration services for oxygen cylinders, please feel free to contact our experts at Sigma Labs or to book a service.

Want to speak to our Customer Care Executive?

Just Submit Your Contact Details and We’ll be get in Touch With You Shortly.